Updated: PLC and SCADA Training Courses Schedule

Due to insistent public demand and inquiries from both members and visitors of Pinoy Instrumentation, Narito ang PLC and SCADA Training courses ng MFI Polytechnic Institute.

COURSE TITLE: S7-1200 With TIA PORTAL v.14
This course prepares the participants in programming, installation and maintenance of automation systems and their application programs. This training introduces the participant to the Siemens S7 1200 PLC hardware and software and will build skills on programming, installation, commissioning and fault diagnostics, and PROFINET communications network. This Training also provides programming techniques and instructions that will help the participants in configuring S7 1200 PLC. The course format is a combination of instruction and hands-on exercises. After each procedure has been demonstrated, the participants will be given opportunity to apply what they learned by programming ladder logic and testing the project with the PLC workstation.

TOPICS:

Introduction to PLC
Installation and Maintenance of PLC
Introduction Totally Integrated Automation (TIA)
Programming Software Familiarization (TIA Portal V.14)
Configuration of Ethernet communication to PLC
Hardware Configuration
Hardware Commissioning
Clock Memory
Watch Table  –   Monitor / Modify Values
PLC Tags, Symbols and Addressing

Online Diagnostics

  1. Diagnostic Buffer
  2. Hardware Diagnostics
  3. Module Information

Block Architecture and Program Editor

  1. Organizational Block (OB)
  2. Functions (FC)
  3. Function Block (FB), Data Block (DB)

Binary Operations

  1. Logic Operations
  2. RLO
  3. Examine ON and OFF condition
  4. Assignment
  5. Setting
  6. Resetting
  7. Edge Trigger – Positive (Rising), Negative (Falling)

Digital Operations

  1. Single Instance
  2. Multi Instance
  3. Timer Operations
  4. Counter Operations
  5. Move Operations
  6. Conversion Operations
  7. Comparator Operations
  8. Math Functions

Documentations

Course Fee: PHP 14,000
Duration: 40 HRS
Schedule: See below table

To enroll to this course, click HERE.

COURSE TITLE: PROGRAMMABLE LOGIC CONTROLS (PLC)
This course covers the operation, application, basic capabilities, functional features, specifications, troubleshooting procedures and preventive maintenance of a programmable logic controller (PLC). In this course, the participant develops an appreciation of mechatronics and the many advantages of a PLC compared to conventional control systems. Emphasis is given to the actual hook-up of the PLC to common electrical and electro-pneumatic devices such as lamps, relays, contactors, solenoid valves, timers, counters, directional valves and cylinders. Hands-on exercises on testing and simulation of various practical applications with a PLC are also covered.

Course Fee: PHP 8,000
Duration: 40 HRS
Schedule: See below table

PASIG CAMPUS
To enroll to course, click HERE.

PASAY CAMPUS
To enroll to course, click HERE.

DE LA SALLE ARANETA UNIVERSITY CAMPUS
To enroll to course , click HERE.

COURSE TITLE: ADVANCED PROGRAMMABLE LOGIC CONTROLS (APLC)
This course is the continuation of basic PLC which provides an in-depth training of the advance features of programmable logic controllers including advance instructions sets, registers, data manipulation, subroutines, arithmetic, analog functions, I/O interrupt and PID control. It provides theoretical knowledge, practical skills and competencies required to implement advanced programming techniques in PLCs, to network PLCs and interface them with industrial processes and systems.

Course Fee: PHP 9,000
Duration: 40 HRS
Schedule: See below table

PASIG CAMPUS
To enroll to this course, click HERE.

PASAY CAMPUSTo enroll to this course, click HERE.

COURSE TITLE: APPLIED PLC – PASAY CAMPUS ONLY
This is a combination of PLC and Advanced PLC courses offered at discounted rate.

Course Fee: PHP 16,400
Duration: 90 HRS
Schedule: See below table

To enroll to this course, click HERE.

COURSE TITLE: SCADA VISUALIZATION USING WONDERWARE INTOUCH (SCADA-VUWI)
This course introduces Supervisory Control and Data Acquisition (SCADA) – its definition, operation and application to industrial automation and control systems. It provides learners the tools for creating graphical representation of plant operation. The use of Wonderware InTouch SCADA
software shall be implemented for creating graphic display. Learners will be able to create simple to
complex HMI applications which demonstrates the use of graphic symbols, animation, links, alarms, scripts, historical trends, etc., for monitoring and controlling machine and process automation systems. Created application shall be linked to programmable logic controllers (PLC) to show the actual operation the whole system.

Course Fee: PHP 10,000
Duration: 40 HRS
Schedule: See below table

To enroll to this course, clickHERE.

DISCLAIMER: Posted schedules may change without prior notice from Pinoy Instrumentation and MFI Polytechnic Institute.

3 thoughts on “Updated: PLC and SCADA Training Courses Schedule”

Leave a Reply

Your email address will not be published. Required fields are marked *